Guides › Mahlkönig E65S
Mahlkönig E65S grind drifting or dose inconsistent: what to check
Updated 2026-10-23
Separate the two problems first. If the grind itself changes, look at the burrs and the chamber. If the grind is steady but the weight in the portafilter varies, look at the dosing and the scale.
Grind size drifting
Unplug the grinder before you open it or reach into the burr chamber.
- Worn burrs, or burrs that need re-adjusting after a service.
- A clogged chamber or spout — common after running too fine or letting coffee build up.
- A burr flange or adjustment ring that wasn't seated correctly after the last burr change.
- A foreign object riding in the grinding mechanism.
Dose weight inconsistent (grind-by-weight models)
- The scale has shifted, or the grinder sits somewhere with vibration or a draft.
- The scale is overdue for calibration — the manual calls for it about every six months, after the portafilter support is readjusted, and after the grinder is moved.
- A dirty flapper or spout holding back coffee.
Calibrating the scale
- Clean first. Brush ground coffee off the portafilter intake, the portafilter support, the spout and the scale cover.
- Open the service menu. Turn the controller to the Service item, confirm, then choose the weighing-scale calibration.
- Use a 1 kg weight. Follow the prompts and place a 1 kg calibration weight on the portafilter support when asked, then finish the steps on the display.
Burrs
- 65 mm special steel burrs (standard): Mahlkönig 306715 (replaces 275123).
Ask about your machine
EspressoScanner answers from the manufacturer's manuals and parts books, with the page cited. Try EspressoScanner.
Always disconnect power and release pressure before working inside a machine. Check part numbers against the manufacturer's documentation for your exact model before ordering. Brand names are trademarks of their owners; EspressoScanner is not affiliated with them.