Guides › Espresso machines and grinders

Tools every espresso machine technician should carry

Updated 2026-10-23

A good kit turns guesswork into readings. This is the core set most techs who service commercial espresso machines and grinders carry, and what each tool is for.

Electrical

  • Multimeter with capacitance and temperature — element and coil resistance, continuity on switches and thermostats, and checking motor capacitors (the printed µF on a capacitor tells you nothing about its health).
  • Clamp meter — confirm an element or pump is actually drawing current while the machine runs.
  • Non-contact voltage tester — a quick check before you touch anything.
  • Capacitor discharge tool or a suitable resistor on insulated leads — never short capacitor terminals with a screwdriver.
  • Crimpers and a supply of spade terminals and heat-shrink.

Pressure and temperature

  • Portafilter pressure gauge with a blind basket — static brew pressure at each group, and comparing a suspect group against a good one.
  • Group-head thermometer or data logger — brew temperature at the puck.
  • Line pressure gauge — incoming water pressure before you blame the pump.

Group service

  • Gasket pick and group brush — swapping group gaskets and shower screens.
  • Blind baskets and espresso-machine detergent for backflushing (detergent, not descaler).
  • Food-grade silicone grease for O-rings and steam valve pistons.

Mechanical

  • Metric socket set, open-end and offset wrenches for fittings and compression nuts.
  • Hex and Torx drivers, including long ones for grinder burr carriers.
  • Inspection mirror and a headlamp — most of the work is inside a cramped frame.

Water

  • Hardness test strips or a TDS meter — scale is behind a large share of repeat calls, and most manufacturers specify a hardness range.

Ask about your machine

EspressoScanner answers from the manufacturer's manuals and parts books, with the page cited. Try EspressoScanner.

Always disconnect power and release pressure before working inside a machine. Check part numbers against the manufacturer's documentation for your exact model before ordering. Brand names are trademarks of their owners; EspressoScanner is not affiliated with them.